The Lighting Quotient introduces the Elliptipar S107 miniature profile linear wall/pendant with asymmetric distribution uplight and adjustable aiming. It has the highest lumen output in the smallest form factor for a linear asymmetric indirect product. The luminaire delivers over 3,000 lumens per ft at 2700K and 90 CRI, as well as 3,800 lumens per ft at 4000K at 90 CRI.
The Renew Linear Luminaire from Pinnacle Architectural Lighting provides material innovation as the first linear luminaire with a hybrid aluminum spine and FSC wood panels that can be removed. Renew reduces used aluminum by 63% and enables circularity via replaceable outer materials without impacting the structure performance or code compliance of the luminaire. This is the first linear luminaire with a removable material side-panel system, enabling material reuse and recycling at the end-of-life or future updates using new finishes without replacing the core structure or performance of the luminaire.
RAB Lighting introduces the C-Strip: the first sustainable, field-adjustable strip light that includes a unique housing composed of bio-renewable materials including coffee chaff, seashells, and recycled plastic. It was designed with an innovative interior hinge that allows for the fixture to fold in half to minimize shipping materials and carbon cost for 8-ft fixtures. The C-Strip provides the highest efficiency of 155 lm/W for field-adjustable strip lights.
The Peeta from Selux Corporation is a fully sealed luminaire that can achieve IP65, IK10, and has a 3G rating for interior or exterior installation. It’s fully sealed for up to 12-ft water depths and provides a wet location label. The tri-extruded lens seals along the length, while the proprietary sealing endcaps keep the fixture enclosed at the ends and joints. The Peeta validates transparency and sustainability by highlighting its Declare label.
Modular International Inc.’s Integrated Recessed Linear Trough system is completely customizable to support trimmed, trimless, and flangeless recessed installations. The trough system is fitted with third-party mechanical elements to support HVAC diffusers, sprinklers, audio speakers, security cameras, and occupancy sensors. It includes high-efficiency and high-output 579e static-white, dim-to-warm, and tunable-white LED modules. The 579e modules deliver lumen outputs from 744 to 5,725 lumens at up to 166 lm/W. It also supports the largest range of standard dimming protocols and control options including phase cut, 0-10-V, DALI-2, D4i, DMX, and various wireless protocols.
Lumencore Linear Dynamic White from Lumenpulse maintains the highest CRI values over a range of 1800K to 6500K, utilizing Optiwhite plus technology. Lumencore maintains a high constant CRI from 91.2 to 93 across the entire CCT range, precisely over the black body curve. The linear dynamic white luminaire uses mixed-micro TIR optics to achieve very uniform, high-quality white light up to 1,383 lumens per ft.
Optique Lighting’s Perifina Curved Corner 3 and 4 in. is a new recessed mud-in rounded corner cove luminaire. Supporting cove apertures of 3 and 4 in. and drywall thicknesses of ½ in. and 5⁄8 in. It illuminates corners at the wall-to-wall and wall-to-ceiling intersections and is the first to include RGBW and white light with a wide range of color temperatures with a tight two-step MacAdam ellipse for quality and color consistency.
The Zenlite Recesseless, from PreciseLED Inc., is an LED luminaire that is just 5 millimeters thick and appears to be recessed but is actually surface mounted. Using white chip-on-board LED technology, it is fully illuminated with no visible diodes and powered from below, ensuring no visible wiring. The luminaire allows for a clean architectural minimalistic appearance and greater design flexibility, as lighting layouts can be switched easily.
Scout Lighting introduces the Slip Stream, a shallow-profile, 5⁄8-in.-deep sheetrock installation kit that utilizes the Scout FlexDuo Tape Light that was accepted in the 2024 Progress Report. The edge-lit design eliminates the need for edge-lit plastics and reduces plastic use. The inclusion of a seamless flip-flop lens allows for uninterrupted lensing across lengths, miters, and seamless transitions to maintain consistent edge lighting and even illumination.
The Stripe from Liteline is a plug-and-play linear lighting system built to simplify the design build process for contractors and designers. Designs can easily replicate inspiration by selecting linear components and connectors to create unique designs without the need to cut and assemble fixtures on-site. It can support a continuous run of 150 ft from a single power source, enabling a long continuous installation. The Stripe can be mounted as a direct wall mount, indirect wall mount, a wall graze mount, or with adjustable and magnetic mounting brackets.
QTL’s Micro 5 POP is a micro-linear LED fixture that provides asymmetric light distribution in a compact form. Delivering a precise 75- or 80-deg beam angle, the fixture is ideal for shallow substrates where low glare and full illumination of the back wall is desirable. It achieves a CRI of 98 with its standard lens ensuring exceptional color accuracy. The POP is also available in encapsulated wet-rated versions. Multiple profiles and mounting options are available in surface-mounted, recessed with flange, and mud-in profiles, providing versatility to accommodate diverse architectural applications.
