Denios
Denios is offering HazMat stations, which provide compliant and reliable secondary spill containment and storage for hazardous materials. Designed for versatility, these durable OSHA/NFPA compliant products hold a standard pallet with up to 4- to 55-gallon drum for ease of removal with a forklift. Interiors can also be customized to suit storage requirements for other containers. Each lockable unit features an 11-gauge steel fame, a liquid-tight sump for the safe containment of spills and is fully welded for strength and durability. The units can be used indoors or outdoors and feature passive ventilation to alleviate the buildup of hazardous fumes, a lid with controlled drainage to direct water away from stored materials, and a heavy-duty pinned hinge system for smooth operation. Gas cylinder shocks allow easy lid lifting and convenient access to contents. www.denios-us.com
Faro
3-D measurement and imaging company Faro Technologies introduced a handheld portable 3-D metrology device. The Leap ST is a metrology-grade tool excelling in measuring and verifying a variety of surfaces and parts. The portability of the device allows users to measure quickly, reduce setup time, minimize preparation and speeding up projects. An advanced optical configuration reduces the number of targets required, and the integration of blue laser, infrared, and photogrammetry technologies, complemented by optical filters, ensures effective scanning across virtually any surface. With multiple operating modes, including large-area scanning and hyper fine scanning, the Leap ST can handle everything from large parts to intricate details. www.faro.com.
Dekotec
With Fortide, Dekotec GmbH expands its product range with high-performance epoxy coatings. The new products, as liquid two-component epoxy-based systems, provide both exceptional corrosion protection and — at the same time — mechanical resistance for a wide range of applications. This includes applications under tough conditions (e.g., for use at high operating temperatures up to +150 degrees C, or +302 degrees F), for moist surfaces or as internal coatings for tanks or pipelines. All Fortide systems comply with the international standard ISO 21809-3. www.ekotec.com
Oxford Flow
Oxford Flow, the flow control equipment specialist, is launching two pilots, designed for use in high- and low-pressure environments in response to demand among gas distribution networks (GDNs). Designed for use with the company’s hydrogen-ready IM series gas regulators, the pilots will expand the market and offer the GDN operator a solution that can be used throughout its system, with differing pilots in each pressure area. The PRX2H high-pressure pilot is now ready to be deployed with the PRX2L low-pressure pilot is scheduled for release in early 2024. The new range of pilots includes: PRX2L low pressure reducing pilot (13mbar-1.2 bar); PRX2 pressure reducing pilot (0.5-25 bar); PRX2H high pressure reducing pilot (17-70 bar); and PSX1 pressure sustaining/creep relief pilot (0.5-22 bar). www.oxford-flow.com
Trelleborg
Trelleborg Sealing Solutions launched its Stefa high-pressure radial shaft seal portfolio designed to deliver unmatched performance across a wide variety of demanding applications. The radical shaft seals are optimized to improve sealing performance for various speed, chemical compatibility and pressure challenges. They also feature innovative engineered designs that compensate for shaft misalignment, ensuring reliable sealing under extreme conditions. Developed in conjunction with customers using finite element analysis (FEA) and advanced Trelleborg test rigs, Stefa seals provide smart, globally compliant solutions for various types of hydraulic motors and pumps. They are proven at pressures of up to 20 MPa and speeds of up to 17 meters per second (MPS). www.trelleborg
Esco Tool
Esco Tool offers a portable, inner-diameter clamping pipe beveller with a variable-speed electric motor for use on-site. The Prepzilla Millhog Clamping End Prep Tool features an electric motor with increased power and variable speeds from 9 to 31 rpm for continuous use and faster beveling. Equipped with a three-blade holder that can bevel any angle, face and bore simultaneously, the tool can produce precision end preps on hard stainless steels and highly alloyed pipe. It only requires one mandrel and eight sets of clamps for its entire range. The tool is designed for pipe ranging from a 1.575-inch inner diameter (ID) to an 8.62-inch outer-diameter (OD). It has motor specifications of 230 V, 3.08 hp (2,300 W) and 50 to 60 Hz, and it has dual-opposed tapered roller bearings to support the motor. www.escotool.com P&GJ