Krohne
Krohne introduced Continuous Float Monitoring (CFM) diagnostics in its VA flowmeters. This innovation detects float blockages, pulsations, external magnetic interference, and other anomalies that could compromise measurement accuracy or system safety. These diagnostics are available across the company’s electronic VA meters and can be retrofitted into existing installations through modular upgrades. By incorporating modern diagnostics and achieving SIL compliance, companies can meet stringent safety requirements while maintaining cost-effectiveness. The company’s portfolio of SIL-certified VA meters is specifically designed to monitor minimum and maximum flow rates and initiate shutdowns in hazardous environments. Notably, 92% of these devices are deployed in Class I, Division 1 hazardous areas. https://krohne.com/en
Dekotec
With Fortide, Dekotec GmbH expands its product range with high-performance epoxy coatings. The new products, as liquid two-component epoxy-based systems, provide both exceptional corrosion protection and — at the same time — mechanical resistance for a wide range of applications. This includes applications under tough conditions (e.g., for use at high operating temperatures up to +150 degrees C, or +302 degrees F), for moist surfaces or as internal coatings for tanks or pipelines. All Fortide systems comply with the international standard ISO 21809-3. www.ekotec.com
Trafag
Trafag, a manufacturer of measurement devices, offered its 879x Hybrid Gas Density Monitor RS485/MODBUS, combining self-acting monitoring and continuous density measurement of insulating gases in one device. The monitor uses a hybrid measurement principle, combining gas density reference chamber and oscillating quartz sensing element technologies for direct and accurate gas density measurement. It is fully temperature compensated, providing exact switching output at all temperatures, ensuring accurate readings and reliable performance regardless of temperature fluctuations. Its wide ambient temperature range of -40° C to +80° C ensures accurate and dependable performance in extreme conditions. A floating change-over contact (SPDT) output provides reliable switching output for alarm systems or control functions based on pre-set density thresholds, and multiple switchpoints (1-3 microswitches) allow users to set multiple alarm thresholds for different density levels, providing greater flexibility and control. www.trafag.com
Tnemec
Protective coatings manufacturer Tnemec, announced the launch of Series 108 and Series 109 ProBond, the newest epoxy penetrating sealers in the Tnemec family of coatings. The Series 108 and 109 bring additional performance and convenience features to the marketplace, such as extended pot life and recoat windows, low-temperature cure, shipping and packaging advantages. The products were designed to adhere to various substrates, including old finishes, and are frequently used as an overcoating primer. Series 108 and 109 are solvent-free coatings applied at a low film thickness to reduce stress and weight on old tightly adhered coatings, creating a reliable foundation to accept high-performance epoxy and polyurethane finishes. www.tnemec.com
Flowserve
Flow control products and services provider Flowserve released Limitorque QX Series B (QXb) quarter-turn smart electric actuator, with connectivity with the Flowserve Flowsync App. The actuator is designed for versatility in demanding applications in midstream, including choke, isolation and control valve applications. The device’s IP68-rated double-sealed enclosure and non-intrusive control knobs eliminate the risk of water or dust ingress for improved reliability. Also, the design removes the need for a heater. Increased precision is also achieved with 0.1% positioning accuracy.
Graco
Manufacturer of fluid handling equipment, Graco has expanded its Quantm line by offering the Xtreme Torque motor, which is designed to reduce the weight and size of the pumps, making them far easier to deploy and maintain. The electric double diaphragm (EODD) pumps can save up to 80% on energy compared to traditional pumps and deliver fast ROI, often within 12 months. The design makes routine maintenance easier, eliminates pressure sensors and reduces the risk of failure due to clogged lines or closed valves. The pumps also handle challenging fluids, including abrasives, solids, aggressive chemicals and shear-sensitive materials. QUANTM is a convenient drop-in replacement because of its plug-and-play design and compatibility with existing 110V, 240V or 380V/480V power outlets. www.graco.com P&GJ