When a project calls for horizontal directional drilling (HDD), it is important to use a qualified contractor and the right equipment for specific needs, especially when it involves a large rig. This annual census, compiled by Underground Infrastructure and Pipeline & Gas Journal, serves as a valuable resource in the selection process and, ultimately, project success.
The most common industry standard for this HDD-rig category is pullback force of at least 100,000 lbs and, in this year’s census, reaches a maximum of 1.8 million lbs. Other relevant statistics include maximum pipe diameter and maximum torque.
Aaron Enterprises Inc.300 Cloverleaf Rd.York, PA 17406p: (717) 854-2641w: aaronenterprises.come: pgrove@aaronenterprises.com, hdd@aaronenterprises.comcontact: Paul Grove
5 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 60 in.Maximum Pullback: 625,000 lbs.Maximum Torque: 80,000 ft.-lbs.
Aaron Enterprises offers tooling for environmentally sensitive crossings, on-staff engineers, real-time remote monitoring system with client access, soil stabilization and installation of conductor casing.
ARB Inc.7515 Irvine Center Dr.Irvine, CA 92618p: (949) 598-9242w: prim.come: dwarrilow@prim.comcontact: Dorian Warrilow
2 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 60 in.Maximum Pullback: 750,000 lbs.Maximum Torque: 92,000 ft.-lbs.
ARB Inc. is a full-service pipeline contractor performing all aspects of HDD, including drilling services, pipe fabrication and tie-ins, in the U.S.
Atlas Trenchless LLC1351 Broadway St. West, Cold Spring, MN 56320PO Box 488, Rockville, MN 56369-0488p: (320) 685-7578w: atlas-trenchless.come: jiml@atlas-trenchless.comcontact: Jim Lagios
6 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 60 in.Maximum Pullback: 750,000 lbs.Maximum Torque: 85,000 ft.-lbs.
National HDD contractor specialized in horizontal directional drilling, auger boring, guided auger boring, tunneling and microtunneling.
Badger Drilling LLC9980 Sandler Road, Jacksonville, FL 32222p: (904) 379-0549w: jacksonvilleboringcontractors.come: lnicks@badgerdrillingllc.comcontact: Leonard Nicks
2 Rigs with Minimum 100,000 lbs. pullbackMaximum Pipe Diameter: 42 in.Maximum Pullback: 500,000 lbs.Maximum Torque: 75,000 ft.-lbs.
We drive Florida-wide and specialize in Florida ground conditions. Badger has operated in the business for 20 yrs and has highly skilled technicians.
Benton-Georgia Inc.PO Box 838, Douglasville, GA 30133p: (770) 942-8180w: benton-georgia.come: jjinks@benton-georgia.comcontact: Jamie Jinks
5 Rigs with Minimum 100,000 lbs. PullbackMaximum pipe diameter: 60 in.Maximum Pullback: 625,000 lbs.Maximum Torque: 100,000 ft.-lbs.
Operates and maintains a fleet to meet ever-changing HDD needs, completing installations in lengths up to 6,500 ft. and diameters up to 48 in.
Brotherton Pipeline Inc.11 Frontage Rd Gold Hill, OR 97525p: (541) 855-7062w: bplinc.com e: email@bplinc.com contact: Peter Anhorn
8 rigs with Minimum 100,000 lbs. PullbackMaximum pipe diameter: 48 in. Maximum Pullback: 550,000 lbs.Maximum Torque: 88,000 ft.-lbs.
Brotherton Pipeline, Inc. is a registered Minority Contractor (MBE) and has been qualified in the field of underground utility installation for over three decades.
Canadian Horizontal Drilling Inc.RR #1, Wetaskiwin, Alberta, Canada T9A 1W8p: (780) 352-5041w: canadianhorizontal.cae: rob@canadianhorizontal.cacontact: Rob Fontaine
4 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 48 in.Maximum Pullback: 500,000 lbs.Maximum Torque: 75,000 ft.-lbs.
Company specializes in hard-rock formations, with expertise in all HDD applications and technical proficiency in all areas of HDD.
Central Trenchless Inc.501 53rd Street SW, Minot, ND 58701p: (701) 839-6767e: shouim@ctihdd.comcontact: Shaun Houim
4 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 36 in.Maximum Pullback: 440,000 lbs.Maximum Torque: 60,000 ft.-lbs.
Cherokee Directional Drilling Inc.8706 N. Highway 259, Longview, TX 75605p: (903) 663-9091w: cherokeeddi.come: mmorales@cherokeeddi.comcontact: Miguel Morales
5 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 42 in.Maximum Pullback: 440,000 lbs.Maximum Torque: 80,000 ft.-lbs.
Cherokee DDI is a family-owned and -operated business that specializes in installation of pipelines, water and sewer lines, telecom and other utilities, by HDD method.
Chisholm Services LP140 Risinger Road, Ferris, TX 75125p: (469) 240-5794w: chisholmservices.come: brian@chisholmservices.com; trag@chisholmservices.comcontact: Brian Whitaker; Trag Bailey
5 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 42 in.Maximum Pullback: 440,000 lbs.Maximum Torque: 154,000 ft.-lbs.
HDD installation servicing the oil & gas, municipality, and telecom industries; pipe installations range from 2-in. to 42-in. diameter and up to 4,000 ft.
COE Drilling Pty LtLevel 2, 22 Cordeila Street, Brisbane, Queensland, 4101 Australiap: +61 7 3029 1300w: coedrilling.com.aue: e.foley@coedrilling.com.aucontact: Eamon Foley
6 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 56 in.Maximum Pullback: 1,300,000 lbs.Maximum Torque: 100,000 ft.-lbs.
Australia’s longest-established HDD company providing design, engineering and construction of trenchless solutions for each project’s unique challenges and conditions.
David Mancini & Sons2601 Wiles Road, Pompano Beach, FL 33073p: (954) 977-3556w: dmsi.coe: dmancinijr@dmsi.cocontact: David Mancini Jr.
1 Rig with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 54 in.Maximum Pullback: 660,000 lbs.Maximum Torque: 80,000 ft.-lbs.
As a fourth-generation contractor we bring the experience to get the job done. Our motto is NGUNS: Never Give Up, Never Surrender.
Davis Directional Drilling LLC9119 Oklahoma 76/PO Box 177, Healdton, OK 73438p: (580) 229-1280w: davisdirectionaldrilling.come: daviscorp@sbcglobal.netcontact: Doug Davis
2 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 36 in.Maximum Pullback: 550,000 lbs.Maximum Torque: 50,000 ft.-lbs.
We have been in business for more than 50 yrs and have done HDD work for more than 20 yrs. Experience is our key to success.
Direct Horizontal Drilling11507 272 Street, Acheson, Alberta, Canada T7X 6E9 p: (780) 960-6037w: directhorizontal.come: dave.f@directhorizontal.com; rick.s@directhorizontal.comcontact: Dave Fisher; Rick Shipalesky
15 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 60 in.Maximum Pullback: 1,100,000 lbs.Maximum Torque: 100,000 ft.-lbs.
Complete services and expert solutions for HDD and river crossings. Industry leader with proven success in some of the toughest drilling environments in the world.
Driver Pipeline Co. Inc.1200 North Union Bower Rd., Irving, TX 75061p: (800) 852-1405; (214) 638-7131w: driverpipeline.come: jlangford@driverpipeline.comcontact: John Langford
11 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 36 in.Maximum Pullback: 200,000 lbs.Maximum Torque: 25,000 ft.-lbs.
Driver Pipeline has more than 20 yrs of experience in the HDD industry, offering turnkey solutions to HDD projects.
DRS Enterprises5339 Canal Rd, Garfield Heights, OH 44125p: (216) 581-7771e: drs120@yahoo.comcontact: Dan Schmoldt
5 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 60 in.Maximum Pullback: 1,100,000 lbs.Maximum Torque: 80,000 ft.-lbs.
Directional drilling from small diameter to 60-in. diameter; distances from 100 ft. up to 7,000 ft.; bore intersect capability and rock capabilities in many diameters.
ECI Contracting56035 State Hwy 56, West Concord, MN 55082p: (507) 527-2294w: ecicontracting.use: mdull@ellingsoncompanies.comcontact: Matt Dull
8 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 54 in.Maximum Pullback: 1,000,000 lbs.Maximum Torque: 80,000 ft.-lbs.
Expertise for projects that are large or small, and through soft soils to hard rock. Capabilities up to 54-in. diameter and more than 8,000-ft. lengths.
Forages Nella Inc.118 De La Gare, St. Henri, Quebec, Canada G0R 3E0p: (418) 822-2002w: nella-drilling.come: info@nella-drilling.com
2 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 48 in.Maximum Pullback: 750, 000 lbs.Maximum Torque: 94,000 ft.-lbs.
Capability to adapt our machinery and procedures to succeed in all types of HDD projects, regardless of size and difficulties encountered.
Gabe’s Construction Co. Inc.4804 N. 40th St., Sheboygan, WI 53083p: (920) 459-2600w: gabes.come: neastway@gabes.comcontact: Nathan Eastway
5 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 48 in.Maximum Pullback: 625,000 lbs.Maximum Torque: 100,000 ft.-lbs.
Provides HDD services for the pipeline, utility and telecommunications industries throughout North America, in all geological conditions. Also offers six smaller utility rigs.
Gator Boring & Trenching Inc.1800 Blackbird Lane, Pensacola, FL 32534p: (850) 477-0742w: gatorboring.come: lisa@gatorboring.comcontact: Lisa Lyons
7 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 48 in.Maximum Pullback: 500,000 lbs.Maximum Torque: 50,000 ft.-lbs.
Serving the southeastern U.S. with 5 HDD rigs and fusion crews. Specializing in gravity bores, subaqueous crossings and water/sewer bores.
Global Underground Corp.641 Winters Dr., Colorado Springs, CO 80907p: (719) 471-7414w: globalug.come: rmeadows@globalug.comcontact: Robert Meadows
4 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 60 in.Maximum Pullback: 440,000 lbs.Maximum Torque: 80,000 ft.-lbs.
Have provided HDD services, since 1999, primarily to government agencies, military facilities, and municipalities, for water, wastewater, natural gas, petroleum, electric, drainage and communications.
H&H Enterprises6104 Fenkell Rd./PO Box 1539, Andover, OH 44003p: (440) 293-8911w: handhent.come: bunky.jordan@handhent.comcontact: Bunky Jordan
3 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 48 in.Maximum Pullback: 220,000 lbs.Maximum Torque: 36,000 ft.-lbs.
H&H Enterprises provides services for all your HDD needs, specializing in solid rock, with capabilities up to 48-in. diameter and 6,000-ft. length.
Harding Directional Drilling10711 Spur 231, Bryan, TX 77807p: (979) 778-2691w: hardingdrilling.come: rhamilton@hardingdrilling.comcontact: Robert Hamilton
5 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 48 in.Maximum Pullback: 1,000,000 lbs.Maximum Torque: 72,000 ft.-lbs.
Full-service directional drilling company serving the continental U.S., Canada and Mexico since 1994. Completed lengths in excess of 8,000 ft.
HardRock Infrastructure Services16500 San Pedro Ave. Suite 410, San Antonio, TX 78232p: (210) 403-2086w: hardrockhdd.come: cory.baker@hardrockhdd.comcontact: Cory Baker
25 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 54 in.Maximum Pullback Capacity: 1,000,000 lbs.Maximum Torque: 98,000 ft.-lbs.
Capabilities to provide full project support, from smallest road bores to longest river crossings. Also provide a full safety team, along with project management.
Horizontal Boring & Tunneling Co.505 S. River Ave., Exeter, NE 68351p: (402) 266-5347w: hbttrenchless.come: horizontalboring@hbttrenchless.comcontact: Brent Moore, Estimator
3 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 60 in.Maximum Pullback: 440,000 lbs.Maximum Torque: 53,000 ft.-lbs.
More than 40 yrs of experience in trenchless methods including tunneling, pipe jacking, concrete box jacking, pilot tube/guided boring, microtunneling, auger boring and pipe ramming.
Horizontal Drilling International165 Boulevard de Valmy, 92700 Colombes, Francep: +33 1 57 60 93 21w: hdi.fre: contact@hdi.frcontact: Denis Pellerin; Atef Khemiri
9 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 56 in.Maximum Pullback: 880,000 lbs.Maximum Torque: 100,000 ft.-lbs.
More than 30 yrs of experience and 2,200-plus successful crossings in over 40 countries; lengths more than 2,000 meters and diameters up to 56 in.
HUXTED Trenchless LLC1306 North FM 3083 Rd. East, Conroe, TX 77303p: (936) 441-9080w: huxtedtrenchless.come: dbrasher@huxtedtrenchless.comcontact: Dustin Brasher6 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 60 in.Maximum Pullback: 1,200,000 lbs.Maximum Torque: 95,000 ft.-lbs.
Offers a full line of HDD and microtunneling capabilities; specializes in large diameter, challenging projects, utilizing our comprehensive trenchless and marine assets.
InterCon Construction Inc.5512 State Route 113 & 19, Waunakee, WI 53597p: (608) 850-4827w: intercon-const.come: sallen@intercon-const.comcontact: Steve Allen
6 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 48 in.Maximum Pullback: 480,000 lbs.Maximum Torque: 80,000 ft.-lbs.
Nationwide contractor experienced in all geological conditions. Consultation, design and execution specialists offering services to gas transmission and distribution, water, sewer, electric and telecom companies.
Isaacks Directional Drilling Co.2710 FM 1069/PO Box 1112, Aransas Pass, TX 78336p: (361) 758-7297e: mscruggs@isaacksdd.comcontact: Monty Scruggs
4 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 48 in.Maximum Pullback: 1,000,000 lbs.Maximum Torque: 93,000 ft.-lbs.
Directional drilling and road boring for the oil and gas pipeline industry.
Kirk Excavating & Construction Inc.1399 Stimmel Road, Columbus, Ohio 43223p: (614) 323-2970w: kirkexcxavating.come: ckirk@kirkexcavating.comcontact: Chuck Kirk
3 Rigs with Minimum 100,000 pounds PullbackMaximum Pipe Diameter: 36 in.Maximum Pullback: 440,000 lbs.Maximum Torque: 60,000 ft.-lbs.
We drill nationwide for pipeline and utilities crossing lakes, rivers, wetlands, highways and everything else in between. We provide wireline, Gyro and walkover services.
LaGreca Services Inc.148 LaGreca Court, Schriever, LA 70395p: (985) 447-4764w: LinkedIn.com, Facebook.come: jason@lagrecahdd.comcontact: Jason Theriot
2 Rigs with Minimum 100,000 pounds PullbackMaximum Pipe Diameter: 60 in.Maximum Pullback: 500,000 lbs.Maximum Torque: 75,000 ft.-lbs.
Incorporated in 1996, LaGreca is a “Do it all” company with less than 20 employees. We take pride in completing special, more complicated projects.
Laney Directional Drilling Co.1100 Alegacy Place, Waller, TX 77484p: (281) 540-6615w: laneydrilling.come: bdurham@laneydrilling.comcontact: Brian Durham
11 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 60 in.Maximum Pullback: 1,300,000 lbs.Maximum Torque: 90,000 ft.-lbs.
Offers turnkey trenchless engineering and construction services for horizontal directional drilling, direct pipe (two 1,650,000-pound and 42” & 48” MTBM thrusters) and pipeline extraction.
LMR Drilling GmbHAmmerlaender Heerstr. 368, 26129 Oldenburg, Germanyp: +49 441 97191-0w: lmr-drilling.dee: fengler@lmr-drilling.decontact: Ernst Fengler
5 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 56 in.Maximum Pullback: 1,011,645 lbs.Maximum Torque: 103,032 ft.-lbs.
Horizontal directional drilling, engineering, construction and installation of HDD crossings, outfalls and shore approaches.
LucasEmirates House, Lvl 22, 167 Eagle Street/GPO Box 144, Brisbane QLD 4000, Australiap: 07 3363 7333w: lucas.com.au
7 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 52 in.Maximum Pullback: 1,100,000 lbs.Maximum Torque: 100,000 ft.-lbs.
International contractor with a strong focus on technically challenging projects, particularly EPL contracts. Also specialize in hard rock drilling utilizing patented tooling.
Mears Group Inc.480 Wildwood Forest Drive, Ste. 320, Spring, TX 77380p: (832) 634-2900w: mears.nete: mark.mitchell@mears.netcontact: Mark Mitchell
18 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 60 in.Maximum Pullback: 1,300,000 lbs.Maximum Torque: 88,000 ft.-lbs.
HDD and direct pipe (500-ton and 750-ton rigs) contractor serving oil/gas, electrical, water/wastewater and fiber industries. Focused on design/build and EPC, with HDD/DP critical factors.
Michels Trenchless Inc.814 Main St., Brownsville, WI 53006p: (920) 583-3132w: michels.use: jsmueller@michels.uscontact: Jeffrey S. Mueller
41 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 72 in.Maximum Pullback: 1,800,000 lbs.
Recognized as the industry leader throughout North America and worldwide, in both land and marine, completing milestone projects with inventive HDD solutions.
Miller Excavation Inc.9000 Choctaw Street, Union City, OK 73090p: (405) 483-5158w: millerexcavationinc.come: millerexcavation@gmail.comcontact: Dale Miller
7 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 60 in.Maximum Pullback: 490,000 lbs.Maximum Torque: 80,000 ft.-lbs.
We specialize in HDD installation of oil, natural gas and municipal water pipeline services, replacements and improvements.
New Tech Construction Inc.6124 Steinhart Park Rd., Nebraska City, NE 68410p: (402) 873-4220w: newtechconstruction.come: brandon.olson@newtechconstruction.comcontact: Brandon Olson
5 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 42 in.Maximum Pullback: 344,000 lbs.Maximum Torque: 50,000 ft.-lbs.
New Tech specializes in soil, rock, cobbles, and boulders conditions, with the capability to install surface casing up to 60” for IFR mitigation.
North Country Directional Drilling LLC21988 Shallow Lake Rd., Warba, MN 55793p: (218)275-7705 w: northcountrydrilling.com e: info@northcountrydrilling.com
7 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 56 in. Maximum Pullback Capacity: 1.4 million lbs. Maximum Torque: 100,000 ft.-lbs.
Provides world-class HDD services for all lengths and diameters, through all types of soils, in nearly all 50 states, North and South America.
OCU GroupArtemis House, Greek Street, Stockport. SK3 8AB. United Kingdomp: +44 (0) 161-248 9922w: ocugroup.come: enquiries@ocugroup.comcontact: Ross Henderson
17 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 56 in.Maximum Pullback: 1,100,000 lbs.Maximum Torque: 112,000 ft.-lbs.
HDD crossings up to 7,545 ft., including hard rock, outfalls, landfalls, environmental wells, design and consultancy work; also has fleet of four midi and mini rigs.
Paladian Crossings Inc.P.O. Box 187, Lethbridge Alberta T1J 3Y5p: (403) 894-0804w: paladiancrossings.cae: jarrod@paladiancrossings.cacontact: Jarrod MacKenzie
2 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 36 in.Maximum Pullback: 240,000 lbs.Maximum Torque: 43,900 ft.-lbs.
Provide HDD services throughout Western Canada, supporting the oil and gas, municipal, civil and telecommunications industries.
REM Directional Inc.13286 County Road 20, Boligee, AL 35443p: (205) 393-2171w: remdirectional.come: joel@remdirectional.comcontact: Joel Colgrove, Jr.
12 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 64 in.Maximum Pullback: 1,200,000 lbs.Maximum Torque: 102,000 ft.-lbs.
REM Directional has been in the trenchless business for 25 yrs.
Sabine Constructors LLCPO Box 1209, Big Sandy, TX 75755p: (903) 352-1201e: jbender@sabinecon.comcontact: Jake Bender
3 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 30 in.Maximum Pullback: 250,000 lbs.Maximum Torque: 40,000 ft.-lbs.
Spartan Directional LLC222 Beau Pre Road, Lafayette, LA 70508p: (337) 837-4433w: spartandirectional.come: boyd@spartandirectional.comcontact: Boyd Simon
7 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 54 in.Maximum Pullback: 1,000,000 lbs.Maximum Torque: 90,000 ft.-lbs.
Maxi rig HDD projects, Spartan Directional is the best choice for maxi-rig HDD projects “Because Experience Matters;” most-experienced superintendents and personnel in the industry.
Spring & Associates Inc.29565 Chilcutt Rd., Easton, MD 21601p: (410) 822-0485w: springandassociates.come: dtaylor@springgroup.netcontact: Robert Taylor
3 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 48 in.Maximum Pullback: 500,000 lbs.Maximum Torque: 85,000 ft.-lbs.
Microtunneling up to 84 in., HDD bores of 1 in.–48 in., on-grade sewer with pilot tube system, and steel jack and bore up to 84 in.
The Crossing Company Inc.1807 8th St., Nisku, Alberta, Canada T9E 7S8p: (780) 955-5051w: crossinggroup.comemmcdonald@crossinggroup.comcontact: Marr McDonald
22 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 60 in.Maximum Pullback: 1,100,000 lbs.Maximum Torque: 100,000 ft.-lbs.
Focused on trenchless construction throughout North America. Services include large and small HDD, auger boring, pipe ramming, microtunneling, tunneling and direct pipe.
The HDD Company3117 N. Cessna Ave., Casa Grande, AZ 85122p: (530) 676-5705w: crossingcgroup.come: thewer@crossinggroup.comcontact: Ty Hewer
20 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 48 in.Maximum Pullback: 1,100,000 lbs.Maximum Torque: 90,000 ft.-lbs.
Excelling at shore approaches, large fiber optic, harbor/marine work, major utility installations and oil and gas projects have made us a trusted name in trenchless construction.
Visser & Smit HanabRietgorsweg 6, 3356 LJ Papendrecht NLp: +31 78 6417222w: vshanab.nle: info@vshanab.nlcontact: S. Korevaar
6 Rigs with Minimum 100,000 lbs. PullbackMaximum Pipe Diameter: 56 in.Maximum Pullback: 900,000 lbs.
More than 150 yrs of experience and a proven record of service, specializing in aboveground and underground pipelines and cable infrastructure.
