Lindsay Corp.
Lindsay Corporation updated two Elecsys products for the oil and gas pipeline industries: Watchdog Tracker LT2 and SentraLink LD, both powered by Elecsys Connect, an intuitive web-based platform that provides real-time insight and control over monitoring assets. With the portal, one can view and graph data, detect trends, assure pipeline integrity and reduce site visits. To access the data, users pay a monthly subscription once the monitors are installed and activated.
The tracker now has weatherproof housing to provide remote monitoring for test stations, end points and critical bond sites along a pipeline and fits inside a standard 3-inch riser pipe. The LD system is a turn-key remote monitoring solution designed for liquid pipeline leak detection with proprietary sensor technology. The sensors have up to a three-year battery life and can be deployed throughout the pipeline. lindsay.com/elecsys
Sensirion
Sensirion offered its next-generation miniature CO2 sensor series, the SCD4x. The device is built on the photo-acoustic sensing principle and the patented PASens and CMOSens Technology enables the small sensor size to combine with high performance. The integrated humidity and temperature sensor enable on-chip signal compensation and additional RH and T outputs. Also, the large supply voltage range (2.4 V-5.5 V), and adjustable power consumption make the SCD4x increases savings. The kit contains a four-pin jumper wire cable that enables fast prototyping, through integration into existing platforms like Arduino and Raspberry Pi. www.sensirion.com/scd4x
OleumTech
OleumTech launched its 4-20mA/HART version of its flagship Tank Level Sensors. Previously, only available in Modbus and wireless configurations, the new HW-RL6 model is designed to meet the needs of users who require a 4-20mA signal or HART protocol for critical level data. The sensor incorporates direct feedback from key users, ensuring optimal functionality and flexibility. In point-to-point hybrid mode, the HW-RL6 delivers both a 4-20mA output for product level measurement and four dynamic HART process variables. The first three HART variables are dedicated to monitoring product level (oil), interface level (water), and temperature, while the fourth variable can be configured to monitor Error Code, Discrete Input Status, or DIN Count. Additionally, in traditional HART mode, the HW-RL6 supports multi-dropping up to 15 level sensors. www.oleumtech.com
Denios
Denios offers the SpillGuard Leak Recognition System, which instantly alerts users when a leak is detected. This FM-approved technology is placed within the sump of a spill containment device, or near the equipment to be monitored, and alerts users with an audible and visual alarm for a minimum of 24 hours when contact is made with a liquid. Designed for use with all essential and common liquid hazardous substances, the explosion-proof system features intelligent, robust sensor technology in a highly resistant, electrically conductive housing. The battery lasts up to five years and provides an audible signal to alert users of the need to replace it. It is deal for use with temperatures from 32° F (0° C) to 104° F (40° C), with a red LED light to indicate that the unit is operating safely. www.Denios-us.com
Dekotec
With Fortide, Dekotec GmbH expands its product range with high-performance epoxy coatings. The new products, as liquid two-component epoxy-based systems, provide exceptional corrosion protection and, at the same time, mechanical resistance for a wide range of applications. This includes applications under tough conditions: e.g., for use at high operating temperatures up to +150 degrees C (+302 degrees F), for moist surfaces or as internal coatings for tanks or pipelines. All Fortide systems comply with the international standard ISO 21809-3. www.ekotec.com
Pettibone
Pettibone brings its X-Series telehandler lineup to the 15,000-pound lifting class for the first time with the Extendo 1544X. The added load capacity is idea for both construction and pipe yard applications. The telehandler is powered by a 117-horsepower Cummins QSF 3.8 Tier 4 Final turbo diesel engine. Mounted onto a side pod, the engine offers easy accessibility to components and daily service checks, while still allowing for exceptional curbside visibility and a ground clearance of 19 inches. The 30-gallon fuel tank provides ample volume for a full day’s work at 100% load. The telehandler comes standard with foam-filled tires. The 1544X offers a maximum lift height of 44 feet, a maximum forward reach of 29 feet, and a maximum load capacity of 15,000 pounds. www.gopettibone.com
Wellube
Flow management and integrity company Wellube launched its latest innovation, the Double Isolation Pipeline Stopper (DIPS). stopper provides a fail-safe isolation using a single size-on-size hot-tap intervention, eliminating the need for additional tapping for bleed and vent ports. This approach reduces risks and enhances safety, making it ideal for use in critical and harsh environments. The technology is third-party approved and is designed to reduce the risk to both asset and operator in highly volatile operational situations. It can be used to enable repairs, maintenance, modifications, or reconfiguration work on existing piping systems, whether on a planned or emergency basis. www.wellube.com