Denios-US
Denios-US introduced the RuptureSeal family of leak stopping devices, which are deployed in seconds to form a secure mechanical seal that stops leaks for hours. The technology is fully functional in 20 seconds, available in four sizes and compatible with over 40,000 substances. With full fuel and chemical compatibility, and an operating range of -16°F (-50°C) to 122°F (50°C), they are ideal for use in chemical, and oil and gas production sites where pipe leaks can occur. The seals provide protection for 10 hours until a permanent fix can be made. Sizes range from 1/8-inch to 2 inches by 6 inches. www.Denios-us.com
Dekotec
Dekotec GmbH offers Dexpand-CF70, which repairs damaged sections of steel pipes and restores structural integrity, returning them to their original level. The carbon composite repair system, the pipeline can be repaired during ongoing operations. The system can provide a saving of about 75%, and take about half as long, Dekotec said. It is suitable to repair defects in which up to 80% of the original wall thickness has been lost. The system is suitable for operating temperatures of up to 70 degrees C (158 degrees F). www.dekotec.com.
IDEC
IDEC offers the BTBH-H easy-stack product line of surface mount terminal blocks in a compact form with multiple amp ratings. These terminal blocks can be stacked or ordered preassembled. BTBH-H blocks are available in four different amp ratings – 10A, 15A, 30A, and 50A – and can be ordered as individual components, or as complete assemblies by amp rating for 2 to 30 poles. The terminal blocks are assembled in a twist- and snap-together fashion, without the need for special tools, connecting rods, or DIN rails, resulting in a low installation height. The terminal blocks have an insulation rating of 600V or more and can accept wires from 18- to 6-AWG. Multipole jumpers are available to simplify wiring of common connections for power distribution. www.IDEC.com/usa
Mission Secure
Mission Secure released its Sentinel 5.0 platform, enabling Zero Trust security architectures for critical infrastructure. The platform provides context-aware cybersecurity policy monitoring and enforcement for operational technology systems. Sentinel 5.0, Mission Secure launches a platform that allows operators to define and enforce granular policies based on a wide range of inputs, including network traffic, attempted remote access, asset firmware versions and vulnerabilities, and the actual digital or analog signal generated by physical devices. While the Sentinel 5.0 platform includes standard capabilities, the platform’s core component is a policy engine that enables highly sophisticated, OT-specific workflows, including creating access control policies to define the conditions under which users or applications can send commands to an industrial device and identifying firmware state and vulnerabilities, as well as limiting access to only fully-patched systems. www.missionsecure.com
Vermeer
Vermeer expanded its horizontal directional drilling (HDD) fluid management equipment line with the new R600T reclaimer. The new 600-gallons/minute (2,271.3-liters/minute) mud recycling system can pair with maxi-rigs pumping between 300 and 600 gallons/minute (1,136 and 2,271 liters/minute) on pipeline and other large-diameter installation projects. The R600T features a redesigned linear-motion shaker deck to help reduce weight, increase the available G-force and extend screen life, as well as several other performance and serviceability-enhancing features. The three-tank (scalped, middle and clean) R600T reclaimer has a total fluid capacity of 7,729 gallons (29,257.4 liters) and can process 1,100 gallons/minute (4,163.9 liters/minute) of drilling slurry for a true cleaning capacity suited for HDD projects in the 600-gallons/minute range. www.vermeer.com
OleumTech
OleumTech is offering two hydrogen sulfide (H2S) gas detection transmitters. The new H2S Transmitters provide continuous monitoring of air quality and generate alarms when H2S levels exceed user-configured setpoints. The transmitters, whether wireless or hardwired, offer a measurement range of 0 to 100 ppm with a resolution of 0.1 ppm. The transmitter is equipped with a field replaceable sensor module enclosed in a 316 stainless steel housing with a steel mesh filter. The hardwired RS485 Modbus version is equipped with two solid state relay outputs as a standard, while the relay outputs are optional on the wireless version. Users can perform bump tests and acknowledge alarms using a single external button. www.oleumtech.com
P&GJ